Installation Instructions

Page 3 of 3
3
● To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not come on at all:
a) Check for loosen or disconnected wires in spot light.
b) Check that the connection between the adapter and the track is correct.
If unable to fix any of the above issues, please consult a certified electrician.
CARE AND MAINTENANCE
TROUBLESHOOTING
Spare Parts List:
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326
AA
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
ASSEMBLY INSTRUCTIONS (continued)
Spot Light
Head
Swivel
3. Adjust the spot light head to a
desired position by rotating the
swivel.
Turn on the power at fuse or
circuit box.
GU10 LED Bulb Max.7W
8077HL
2
Groove
Track (sold separately)
90˚
Metal Tab
Adapter
Release
Lever
2. To attach the adapter to the
track and align groove side (with
two internal copper strips) of the
track and the side with two metal
tabs of the adapter. Push top
portion of the adapter into the
slot in the track and then turn 90˚.
To remove, depress the release
lever and turn 90˚.
Note:
1. The adapter can only be
assembled if the groove side
of the track and the side with
two metal tabs of the adapter are aligned.
2. If the track and the adapter are not aligned
properly, the light won't work.