Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting6" New Construction Airtight Recessed Light Housing with Baffle Trim - 4 Pack

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

PACKAGE CONTENTS

SKU Number: 349-2920

6” 4PK RECESSED LIGHT HOUSING

WITH BAFFLE TRIM

Model Number: RS2792

Page 1 of 3

200325

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or

switching off circuit breaker).

● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact

any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury

or death from electric shock.

CAUTION

● All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).

Contact your municipal building department to learn about your local codes, permits and/or inspections.

● PATRIOT recessed fixtures are designed to meet the latest NEC and UL requirements. Before attempting installation

of any recessed lighting fixture, check your local electrical code. This code sets the wiring standards for your locality

and should be carefully studied before starting to work.

● Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician

before installation.

● Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use

a fixture in a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means,

do not attempt to install this fixture. Contact a qualified, licensed electrician for information with regards to proper

grounding methods as required by the local electrical code in your area.

● If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s).

Summary of content (4 pages)

PAGE 1
SKU Number: 349-2920 6” 4PK RECESSED LIGHT HOUSING WITH BAFFLE TRIM Model Number: RS2792 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
PAGE 2
PREPARATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses, Ladder, Wire Stripper.
PAGE 3
. ELECTRICAL CONNECTION: 2 Remove junction box cover and appropriate knockout(s) to accommodate respective electrical service. Luminaire has been designed to accommodate metallic conduit and non-metallic cable, metallic conduit must be used if local code requires it. Round knockouts are dedicated for metallic cables and rectangular knockouts are to be utilized for non-metallic cables. Connect supply leads to wires in fixture junction box.
PAGE 4
1 2 7-1/2” 11” 6-1/8” DISCLAIMER These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for use’s purpose, please contact a qualified electrician.