Installation Instructions

Page 3 of 3
201119
5. Connect the male / female
connector.
TROUBLESHOOTING
CARE AND MAINTENANCE
Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
This LED light fixture is made from quality materials that will last many years with minimum care. You may want to
periodically clean the fixture with a soft cloth. To maintain the best appearance of the fixture, do not use cleaners with
chemicals, solvents or harsh abrasives. Do not use liquid cleaner on the LEDs, LED drive, or wiring inside the light
fixture.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
POSSIBLE CAUSE CORRECTIVE ACTION
The power is off.
Check to ensure the power supply is on.
Check to ensure the circuit breaker is in
the on position.
Check to ensure proper wire
connections
are made. Contact a
qualified electrician.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the power
wire is grounding out.
Contact a qualified electrician.
Check to ensure proper wire connections
are made. Contact a qualified electrician.
PROBLEM
The fixture doesn't light up.
The fuse blowns or circuit
breaker trips when the light
is turned on.
5
Turn on the power at fuse or circuit box.
6. Squeeze the torsional springs
together as shown and install
into torsional spring brackets
inside the housing.
Pull and secure the retrofit kit.
Torsional Springs
LED Retrofit
6
6” Housing
ASSEMBLY INSTRUCTIONS (continued)