Installation Instructions

Page 3 of 4
191031
ASSEMBLY INSTRUCTIONS (continue)
3. Attach the spring behind the fixture
to the mounting plate (AA) by
aligning holes. Push the fixture to the
mounting plate (AA) until the spring
button the mounting plate (AA)
closely and the fixture is flush with
the ceiling surface.
1. Attach the shrapnel stents (DD)
to fixture.
3. Insert the black and white wires
of the fixture into the E26
conversion socket (FF). Then
push the fixture into the housing
until the shrapnel stents (DD)
button the housing closely and
the fixture is flush with the ceiling
surface.
B. For 4” Housing mounting.
2. Secure the shrapnel stents
(DD) with screws (EE).
Turn off the power at fuse or circuit box.
Turn on the power at fuse or circuit box.
Spare Parts List:
Assembly Kit
Outlet Box
Assembly Kit
4” Housing
Assembly Kit
6176MM (1SET)
Mounting Plate
X1
AA
Wire Connector
X3
CC
Mounting Screw
X2
BB
DD
Conversion Socket
X1
FF
Screws St3.0x8
X2
EE
Shrapnel Stents
X2
II
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.
Screws
OUT RING
1
DD
OUT RING
4” Housing
3
FF
2
DD
EE
AA
Outlet Box
3