Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting4" 100W Equivalent Dimmable Integrated LED DISC Downlight

Page 1 of 4

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 349-1342

4" LED DISC LIGHT

Model Number: RS2707

PACKAGE CONTENTS

191031

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Plate

Conversion Socket

Mounting Screw

Wire Connector

Screws St3.0x8

Shrapnel Stents

Summary of content (4 pages)

PAGE 1
Sku Number: 349-1342 4" LED DISC LIGHT Model Number: RS2707 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS HARDWARE CONTENTS Note: Hardware not shown actual size. AA Mounting Plate X1 DD Shrapnel Stents X2 BB Mounting Screw X2 EE Screws St3.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continue) 3. Attach the spring behind the fixture to the mounting plate (AA) by aligning holes. Push the fixture to the mounting plate (AA) until the spring button the mounting plate (AA) closely and the fixture is flush with the ceiling surface. 3 Outlet Box AA B. For 4” Housing mounting. Turn off the power at fuse or circuit box. 1. Attach the shrapnel stents (DD) to fixture. 1 2. Secure the shrapnel stents (DD) with screws (EE). Screws 2 EE DD DD OUT RING 3.
PAGE 4
CARE AND MAINTENANCE Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. This LED light fixture is made from quality materials that will last many years with minimum care. You may want to periodically clean the fixture with a soft cloth. To maintain the best appearance of the fixture, do not use cleaners with chemicals, solvents or harsh abrasives.