Installation Instructions

1. Using 4.25” template
on the box, mark the
openings and cut the
openings with a drywall
saw where you intend to
install the lights. (Fig.1)
2. Pull wiring through
hole cut out. Using the
wire-nut, connect the
incoming and outgoing
wires by matching white to
white, black to black and
green to ground wire and
twist on. (Fig.2)
3. Once connections of
wires are completed,
carefully tuck wires and
wire nuts into the junction
box making sure no bare
wire is visible at the wire
nuts.
4. Secure the cover to
the junction box by the
screw. (Fig.3)
5. Lift the housing onto the
drywall. (Fig.4)
6. Push to lock the two
remodel clips to hold the can
against the ceiling. (Fig.5)
7. Optional for different
kind of ceiling. (Fig.6)
8. Install specified bulb type
and wattage and trim. (Fig.7)
349-0011
03/16
INSTALLATION:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
4. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
5. DO NOT INSTALL INSULATION WITHIN 76 mm (3 inch) OF ANY PART OF THE LUMINAIRE.
NOTE: Product May Not Look Exactly As Shown In Figures.
RECESSED LIGHT
(FOR NON-INSULATED CEILING)
drywall saw
ceiling
flex with
supply wires
housing
(Fig.2)
(Fig.3)
ceiling
(Fig.1)
(Fig.5)
(Fig.4)
4.25”
diameter hole
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Blade
Screwdriver
Phillips
Screwdriver
Wire Cutters
Pliers
Saw
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
local electrical
code
QUESTIONS OR CONCERNS CONTACT PATRIOT AT: 1-800-267-4427 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T. or email to: guestservice@canarm.ca
ceiling
housing
remodel
spring clip
bulb
(Fig.7)
trim
bulb
(Fig.6)
screw
black
ground wire
white
cover
ceiling
housing
mounting
clip
screw
(not included)
trim
bulb
housing
socket

Summary of content (1 pages)