Installation Instructions

1. Attach two screws to the mounting strap, and secure
with two lock nuts.(You can adjust the length of the
screws if necessary.)
2. Attach the mounting strap to the ceiling box by using
two mounting screws.
3. Cut the redundant wires if necessary, and make wire
connections with wire nuts:
---Connect the smooth wire (marked) from fixture to
the black wire from power source.
---Connect the ridged wire (unmarked) from fixture to
the white wire from power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully tuck wires back into the ceiling box.
4. Unscrew two bolt nuts from the canopy-1, attach the
canopy-1 to the mounting strap, and secure with the
bolt nuts.
5. Screw the nipple-1 into the coupling, and then secure with
the hex nut.
6. Install bulbs.(Please do not exceed the maximum capacity
that is recommended on the package.)
7. Attach the glass shade and the cap upward to the socket
set by inserting the nipple-1 and secure with the finial.
8. Turn on the power at fuse or circuit box.
N
OT
E: Be
fore
i
n
s
talling, c
ons
ult l
oc
a
l
e
le
c
tric
a
l
c
ode
s
fo
r
wir
in
g
a
nd
g
rou
ndin
g requi
re
m
ents.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
351-0107
Installation Steps
For Semi-Flush
For Pendant:(See Fig.1)
1. Attach the nipple-2 to the mounting strap, and secure with
a washer and a hex nut.
2. Attach the mounting strap to the ceiling box by using two
mounting screws.
3. Thread the fixture wire and fixture grounding wire through
the loop, and secure the loop onto the nipple-3.
4. Choose a certain length of the chain you need, and weave
the fixture wire and the fixture grounding wire through the
chain links. Spread one end of the chain link to clamp
securely to the loop.
5. Secure the top loop to the nipple-2.
6. Thread the fixture wire and fixture grounding wire through
the collar, canopy-2, top loop, nipple-2 and mounting strap
in order.
7. Clamp the other end of the chain link to the top loop.
8. Follow step 3 as for Semi-Flush.
9. Attach the canopy-2 to the mounting strap by inserting the
top loop, and secure with the collar.
10. Follow steps 5~8 as for Semi-Flush.
Nipple-3
Fixture
Fixture Wire
Chain
Mounting Screw
Nipple-2
Fixture Grounding Wire
Collar
Top Loop
Canopy-2
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Ceiling Box
Loop
House Grounding Wire
Mounting Parts For Pendant
Fig.1
051005
Patriot Lighting
TM
Lock Nut
Ceiling Box
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Mounting Screw
Fixture Wire
Canopy-1
Bolt Nut
Socket Set
Coupling
Hex Nut
Nipple-1
Glass Shade
Cap
Finial