Installation Instructions

Page 3 of 4
ASSEMBLY INSTRUCTIONS (continued)
AA
HH
JJ
II
HH
JJ
KK
C
D
LL
Socket
Ring
6
7
8
9
9. Pull out the outlet wires and
house grounding wire from
the outlet box.
Connect wires:
---Connect the smooth wire
(marked) from the fixture to
the black wire from the
power source.
---Connect the ridged wire
(unmarked) from the
fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire connector (EE).
Carefully put the wires back into the outlet box.
10
10. Attach the canopy (LL) to
the mounting strap (AA)
and allow the top loop (JJ)
through the canopy (LL),
then secure it with the
collar (KK).
6.Connect one end of the chain
(II) with the loop (A) by using
a loop lock (HH).
7. Connect the other end of the
chain (II) with the top loop (JJ)
by using another loop
lock (HH).
CC
JJ
11
8.Thread the fixture wires and
fixture grounding wire through
the top loop (JJ), threaded
pipe (CC) and mounting
strap (AA).
AA
11. Attach the glass shades (D)
onto the glass holders (C) ,
then secure them with
socket rings.
Install 5x60 watt max medium
base bulbs (bulbs not included).
See relamping label at socket
area or packaging for maximum
allowed wattage.
Turn on the power at the main
fuse or circuit breaker box.
HH
II
A
AA
EE
Installation Steps (FOR CEILING)
ASSEMBLY INSTRUCTIONS (continued)
Turn off the power at the main
fuse or circuit.
1. Attach the two long screws (NN)
to the mounting strap (MM), and
screw in 2 to 3 turns.
MM
NN
1
2. Attach the mounting strap (MM)
to the outlet box using two
short mounting screws (OO).
MM
OO
2
Bulb Type A 60W
(not included)