Sku Number: 351-4714 INDOOR VALUE PACK Model Number:N8016 PACKAGE CONTENTS A E F B D C HARDWARE CONTENTS Note: Hardware not shown actual size.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
ASSEMBLY INSTRUCTIONS (continued) 6.Connect one end of the chain (II) with the loop (A) by using a loop lock (HH). 10. Attach the canopy (LL) to the mounting strap (AA) and allow the top loop (JJ) through the canopy (LL), then secure it with the collar (KK). 6 II HH 10 AA JJ A HH LL 7. Connect the other end of the 7 chain (II) with the top loop (JJ) by using another loop lock (HH). KK JJ 11. Attach the glass shades (D) 11 onto the glass holders (C) , then secure them with socket rings.
ASSEMBLY INSTRUCTIONS (continued) 3. Pull out the source wires from the 5. Attach the threaded pipe (UU) 5 3 E outlet box. Make wire connections into the coupling of the RR MM using wire connectors as follows: ceiling ( E) and secure the • Connect the hot wires (usually black washer (SS) and hex nut (TT). PP insulation) from the fixture to the NOTE: Depth of threaded pipe SS TT black wire from the power source.
