Assembly Instructions

Page 3 of 4
210607
ASSEMBLY INSTRUCTIONS (continued)
4
Medium Base Bulb
Max.60W
(not included)
4. Install one medium base
bulb. (ST or Type A, not
included).
See relamping label at
socket area or packaging
for maximum allowed
wattage.
Fixture Mounting
Screws
3. Attach the backplate
(A) to the mounting
plate unit(AA) by
aligning and
inserting the two
fixture mounting
screws into the open
holes on the
backplate(A), then
secure it with two
bolt nuts(DD).
3
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.
Spare Parts List:
Assembly Kit
6387MM (1 SET)
Mounting Plate Unit
X1
Wire Connector
X3
AA
CC
BB
Mounting Screw
X2
DD
Bolt Nut
X2
DD
A
AA
Turn on the power at the
the fuse or circuit box.
● To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not work:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
CARE AND MAINTENANCE
TROUBLESHOOTING