Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingBeaman Brushed Nickel 5-Light Island Light

SKU NUMBER: 351-8407

5 Light Linear Chandelier

MODEL NUMBER: MND4428A

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:30 a.m. -4:00 p.m., CST .Friday

PACKAGE CONTENTS

REVISED 2019-04-12

Stock Part#

PART

DESCRIPTION

QUANTITY

Fixture Body

Crossbar Assembly

1pc

3pcs

2pcs

Wire Connector

Outlet Box Screw

Quick Link

4pcs

1pc

Ceiling Canopy

Fixture Chain

2pcs

Arm

1pc

N/A

Vintage Bulb

5pcs

Summary of content (5 pages)

PAGE 1
SKU NUMBER: 351-8407 5 Light Linear Chandelier MODEL NUMBER: MND4428A REVISED 2019-04-12 PACKAGE CONTENTS DESCRIPTION PART QUANTITY Stock Part# AA Crossbar Assembly 1 pc BB Wire Connector 3 pcs CC Outlet Box Screw 2 pcs DD Quick Link 4 pcs A Fixture Chain 2 pcs B Ceiling Canopy 1 pc C Arm 1 pc D Vintage Bulb 5 pcs E Fixture Body 1 pc AA A B C BB N/A CC D DD E Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-645-3
PAGE 2
HARDWARE CONTENTS Note: Hardware not shown actual size. AA Crossbar x1 BB Wire Connector x3 CC Outlet Box Screw x2 DD Quick Link x4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING: ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 1: AA a. Secure the crossbar (AA) to the outlet box (not included) with outlet box screws. Tighten until snug. Note : The preassembled mounting nipple on the crossbar should protrude outward. Outlet Box Screw Outlet Box STEP 2: a. Remove lock ball and Hex Nut from crossbar assembly (AA). b. Fit ceiling canopy (B) over the nipple on crossbar assembly and secure with lock ball. Note : The ceiling canopy should be snug against the ceiling and the lock ball.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 5: a. Confirm that the mounting height is acceptable. Refer to STEP 4 if changes are required. Note : To make the next step easier, cut the supply wire and ground wire 24 inches longer than the distance from the fixture loop to the ceiling. Supply Wires and Ground Wire Important : Please pay attention to the polarity (wires labels L & N) when cutting wires. Wire identification will be needed in STEP 7. b.
PAGE 5
ASSEMBLY INSTRUCTIONS STEP 8: Crossbar Assembly A. Re-attach the ceiling canopy to the crossbar assembly. b. Secure with the previously removed hex nut. c. Then, attach the lock ball over the ceiling canopy. Hex Nut lock ball STEP 9: a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage. Your installation is completed now. Restore electricity. Retain this sheet for future reference. CARE AND MAINTENANCE • To clean, turn off and wipe with a damp, non-abrasive cloth.