Installation Instructions

CARE AND MAINTENANCE
TROUBLESHOOTING
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
• To clean, turn off and wipe with a damp, non-abrasive cloth.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-645-3184,
Monday - Friday, 7:00 a.m. -4:00 p.m., CST .
4
ASSEMBLY INSTRUCTIONS
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
STEP 4:
a. Align Mounting Screws (EE) to keyholes on the
Fixture Body (A) and twist the Fixture Body (A)
until the Fixture Body (A) is hung safety.
b. Using Phillips screwdrivers, tighten Mounting
Screws (EE) from holes on the lens as needed to
secure the Fixture Body (A).
EE
A
A
B
C
CC
STEP 5:
a. Place the Shade (B) into the Shade Holder (C)
and fold tabs to secure it.
b. Lift the Shade Holder (C) with the Shade (B)
upward and align holes on the Shade Holder (C) to
mounting holes on the Fixture Body (A).
c. Thread Lock screws (CC) into each hole. Do not
fully tighten.
d. Tighten all screws with screwdriver once all are
threaded into the mounting holes.
Tab