Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingLorenzo Bronze 4-Light Island/Track Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:00 a.m. -4:00 p.m., CST.Friday

SKU NUMBER: 351-9118

4-light Island Fixture or

Track Light Ceiling Fixture

MODEL NUMBER: MND3407J

PACKAGE CONTENTS

REVISED 2017-05-26

Stock Part#

913310KIT

PART

DESCRIPTION

QUANTITY

Crossbar Assembly

1pc

Socket Assembly

1pc

4pcs

2pcs

4pcs

Rod 6”

Shade

Socket Collar

Rod 12”

2pcs

Swivel

9006EXOVB

9012EXOVB

S13307MC

N/A

Wire Connector

3pcs

Mounting Screw

2pcs

Socket Collar Tool

1pc

4pcs

Rod 12” with Nipple

Summary of content (7 pages)

PAGE 1
SKU NUMBER: 351-9118 4-light Island Fixture or Track Light Ceiling Fixture MODEL NUMBER: MND3407J REVISED 2017-05-26 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Stock Part# AA Crossbar Assembly 1pc BB Wire Connector 3pcs CC Mounting Screw 2pcs A Rod 6” 4 pcs 9006EXOVB B Rod 12” with Nipple 9012EXOVB C Rod 12” 4 pcs 2 pcs D Socket Collar 4 pcs E Swivel 2 pcs F Socket Assembly 1 pc G Socket Collar Tool 1 pc H Shade 4 pcs A AA 913310KIT BB B CC C N/A D S13307MC E F
PAGE 2
HARDWARE CONTENTS Note: Hardware not shown in actual size. AA Crossbar Assembly x1 BB Wire Connector x3 CC Outlet Box Screw x2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING: ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation.
PAGE 3
ASSEMBLY INSTRUCTIONS FOR TRACK LIGHT CEILING LIGHT STEP 1: Outlet Box a. Secure the crossbar (AA) to the outlet box (not included) with outlet box screws. b. Tighten until snug. AA Note : The preassembled mounting nipple on the crossbar should protrude outward. Outlet Box Screw STEP 2: a. Remove lock ball from crossbar assembly. b. Fit ceiling canopy over the nipple on crossbar assembly and secure with lock ball.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 5: * Use Wire Connectors (supplied) to connect the wires. a) Ground Wire: 1. Wrap supply ground wire around green ground screw on mounting bracket, no less than 2 inches. from the end of the wire. Tighten ground screw . 2. Connect fixture ground wire to supply ground wire with wire connector. GROUND WIRE GREEN GROUND SCREW GROUND WIRE FROM FIXTURE FROM SUPPLY b) Supply Wire: 1. Connect the supply white wire to the white fixture supply wire with wire connector. 2.
PAGE 5
ASSEMBLY INSTRUCTIONS FOR ISLAND LIGHT CEILING MOUNT STEP 1: a. Remove the Socket Assembly (F) from the Ceiling Canopy by unscrewing Hex Nuts inside of the Ceiling Canopy. Keep all separated parts for the following steps. Spring Washers Hex Nut Lanyard Flat Washer Ceiling Canopy STEP 2: Rod Outlet Box a. Secure the crossbar (AA) to the outlet box (not included) with outlet box screws. b. Tighten until snug. AA Note : The preassembled mounting nipple on the crossbar should protrude outward.
PAGE 6
ASSEMBLY INSTRUCTIONS STEP 4: E a. Determine the Rods to be assembled according to your desired hanging height. b . Pass the Supply Wires through the chosen Rods and then thread Rods to Socket Assembly (F) together as shown. Tighten until snug. - Assemble one rod at a time. - Pass the ground wire through the rod first. - Then, pass the supply wire through the rod. - Thread the rod by hand until snug. c. Screw Swivels (E) into the top end of the Upper Rod.
PAGE 7
ASSEMBLY INSTRUCTIONS STEP 8: * Use Wire Connectors (supplied) to connect the wires. a) Ground Wire: 1. Wrap supply ground wire around green ground screw on mounting bracket, no less than 2 inches. from the end of the wire. Tighten ground screw . 2. Connect fixture ground wire to supply ground wire with wire connector. GROUND WIRE GREEN GROUND SCREW GROUND WIRE FROM FIXTURE FROM SUPPLY b) Supply Wire: 1. Connect the supply white wire to the white fixture supply wire with wire connector. 2.