Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsLorenzo Bronze 2-Light Flush Mount Ceiling Light

ASSEMBLY INSTRUCTIONS

Hex Nut

Stem

STEP 8:

a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.

STEP 9:

a. Place diffuser (C) and the previously removed

rubber washer with flat washer over the stem.

b. Secure with the previously removed hex nut.

c. Hand-tighten until snug.

STEP 10:

a. Place the previously removed cap over the stem

extruding from the diffuser.

b. Secure with the previously removed finial

c. Hand-tighten until snug.

Rubber Washer with

Flat Washer

Stem

Hex Nut

Cap

Finial

STEP 6:

a. Remove the finial, cap, hex nut, flat washer with

rubber washer from the stem assembly (D).

STEP 7:

a. Thread the short threaded end of the previously

removed stem onto the coupling on Socket

Assembly (A).

b. Hand-tighten until snug.

Rubber Washer with

Flat Washer

Stem

Coupling

Cap

Finial

Your installation is now complete. Restore electricity and retain this sheet for future reference.

STEP 5:

a. Remove lock balls from the shade (B).

b. Attach the plate in the center of the shade (B)

onto the plate on the top of the socket assembly

(A).

C. Place the channel of the plate in the center of the

shade (B) over the center tube. Pass the bolts

through the holes on the plate on the top of the

socket assembly (A).

d. Secure by threading previously removed lock

balls onto bolts.

e. Hand-tighten until snug.

Lock Balls

Holes

Shade

Lock Screw

Stem