Installation Instructions

CARE AND MAINTENANCE

TROUBLESHOOTING

1) The light does not come on at all:

2) Fuse blows or circuit trips when light is turned on.

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

• To clean, turn off and wipe with a damp, non-abrasive cloth.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184

Monday - , 7:00 a.m. -4:00 p.m., CST.Friday

ASSEMBLY INSTRUCTIONS

CARE AND MAINTENANCE

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to

clean fixture as they may damage the finish.

Your installation is now complete! Restore electricity and save this sheet for future reference.

STEP 8:

a. Adjust trimmings into position as shown in

DRAWING A.

b. Thread the Stem Assembly (C) into the fixture

body for all stems. Hand tighten until snug.

DRAWING A

Fixture Body