Assembly Instructions

ManualsBrandsPatriot Lighting ManualsChandeliersTaura Matte Black 5-Light Chandelier

Page 3 of 4

210616

ASSEMBLY INSTRUCTIONS (continued)

5. Pull out the source wires

from the outlet box, make

wire connections using

wire connectors(CC) as

Green Ground

Screw

follows:

---Connect the smooth-

coated(marked) wire from

the fixture to the black

(hot) wire from the power

source.

---Connect the ribbed-

coated(unmarked) wire

from the fixture to the white(neutral) wire from the

power source.

---Attach the fixture ground wire(bare wire) to the

mounting strap unit(AA) with the green ground screw,

then connect the fixture ground wire to the house

ground wire with a wire connector(CC).

Carefully put all of the wires back into the outlet box.

6. Attach the canopy(BB)

to the mounting strap

unit(AA) and secure it

with the collar(GG).

Turn on the power at the

fuse or circuit box.

Candelabra base bulb

Max.60W

(not included)

7. Install 5x60W candelabra

base bulbs (not included).

See relamping label at

socket area or packaging

for maximum allowed

wattage.

Weave the fixture wires

through the chain(FF),

collar(GG) and canopy

(BB).

Connect the chain(FF)

Fixture Loop

to the mounting strap

unit(AA) and fixture loop

with two loop locks(EE).

Weave the fixture wires

through the mounting

strap unit(AA).

Determine the length of

chain(FF) needed to

achieve desired fixture

height. (Remove excess

chain section, use pliers

to bend link open.)

Thread the fixture wires

through the washer,

hex nut and threaded

pipe, then attach the

threaded pipe onto the

fixture(A) and secure

them with the hex nut.

Thread the fixture wires

through the tube A,

tube cap, decorative

cap, rod coupling and

fixture loop in sequence,

then secure the fixture

loop tightly to the

threaded pipe.

Hex Nut

Washer

Threaded Pipe

Tube A

Tube Cap

Decorative Cap

Rod Coupling

Fixture Loop