Assembly Instructions

ManualsBrandsPatriot Lighting ManualsChandeliersTaura Matte Black 5-Light Chandelier

210616

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 351-8806

5-LIGHT CHANDELIER

Model Number: MH380

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

Canopy

Wire Connector

Chain

Mounting Strap Unit

Loop Lock

Mounting Screw

Collar

Summary of content (4 pages)

PAGE 1
SKU Number: 351-8806 5-LIGHT CHANDELIER Model Number: MH380 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 3. Thread the fixture wires through the washer, hex nut and threaded pipe, then attach the threaded pipe onto the fixture(A) and secure them with the hex nut. 3 Thread the fixture wires through the tube A, tube cap, decorative cap, rod coupling and fixture loop in sequence, then secure the fixture loop tightly to the threaded pipe. Fixture Loop Rod Coupling Decorative Cap Tube Cap Tube A Threaded Pipe Hex Nut Washer A 5.
PAGE 4
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326. Spare Parts List: AA Mounting Strap Unit X1 BB Canopy X1 CC Wire Connector X3 DD Mounting Screw X2 EE Loop Lock X2 FF Chain X1 GG Collar X1 Assembly Kit 6395MM (1 SET) CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not work: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct.