Assembly Instructions

Page 3 of 4
210605
ASSEMBLY INSTRUCTIONS (continued)
3
Outlet Box
Green Ground Screw
4. Attach the canopy
unit(A) to the
mounting strap unit
(AA) by aligning and
inserting the
threaded pipe from
the mounting strap
unit(AA) into the
center hole on the
canopy unit(A), then
secure the canopy
unit(A) with the finial
(DD).
Turn on the power
at the fuse or circuit
box.
5. Install 3x60W
medium base
vintage bulbs(GG)
(included)
See relamping
label at socket
area or packaging
for maximum
maximum allowed
wattage.
AA
4
5
B
AA
A
DD
CC
3. Pull out the source
wires from the outlet
box, make wire
connections using wire
connectors(CC) as
follows:
--Connect the smooth-
coated(marked) wire
from the fixture to the
black(hot) wire from
the power source.
--Connect the ribbed-
coated(unmarked) wire
from the fixture to the
white(neutral) wire
from the power source.
--Attach the fixture ground wire (bare wire) to the
mounting strap unit(AA) with the green ground screw,
then connect the fixture ground wire to the house
ground wire with a wire connector(CC).
Carefully put all of the wires back into the outlet box.
GG