Installation Instructions

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 351-8602

4L ISLAND LIGHT

Model Number: MH050

PACKAGE CONTENTS

HARDWARE CONTENTS

Mounting Strap Unit

Mounting Screw

Wire Connector

AA BB

Finial

Loop Lock

Page 1 of 4

200609

PAGE 1
SKU Number: 351-8602 4L ISLAND LIGHT Model Number: MH050 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 3. Connect the plate (A) and the loops (B) with loop locks (EE). The same way on the other side. 3 A AA EE B 5. Attach the plate (A) to the mounting 5 strap unit (AA) by inserting the threaded pipe, then secure it with the finial (DD). AA A 4.
PAGE 4
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not work: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.