Installation Instructions

This xture is provided with 3 down rods in order for it to be hung at various heights depending on your specic needs. Before

beginning the assembly process, determine the preferred height, remove any unnecessary rods, and then proceed starting with

step #1.

2. Connect the ground wire to the

mounting unit (AA) by securing it with the

ground screw.

4. Connect the black to black (power), the

white to white (neutral) and copper wire to

ground wire with the wire nuts (EE) and

secure with electrical tape (not included).

Helpful Hint: If wires out of xture are the

same color, attach the side with markings

or letters to black (positive) and the other

to white (neutral).

5. Place the canopy of the light xture (A)

over the mounting unit (AA )and junction box

and secure with self-tapping screws (BB).

Note: You may adjust the wires through the

canopy to the desired height by pushing the tip of

the pipe nipple.