Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WS55408 / WS55508 / WS55608 / WS55708
WS55408
1. Attach the threaded pipe to the mounting strap, then secure it with a washer
and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting screws.
3. Pull out the outlet wires and house ground wire from the outlet box. Make
wire connections using the wire connectors:
---The black wire from the fixture to the black wire from the power source.
---The white wire from the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting strap with the green
ground screw. Then connect it to the house ground wire with a wire
connector.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting strap by inserting the threaded pipe, then
secure it with the end cap.
CAUTION: With silicone caulking compound, caulk completely around
where the back side of the fixture meets with the wall surface to
prevent water from seeping into the outlet box.
5. Install a bulb (not included). See relamping label on socket area or packaging
for maximum allowed wattage.
6. Turn on the power at the main fuse or circuit breaker box.
Mounting Screw
Fixture Wire
Mounting Strap
Hex Nut
Wire Connector
Washer
Fixture Ground Wire
Back Side of the Fixture
Fixture
Green Ground Screw
Outlet Box
House Ground Wire
End Cap
Bulb Type A Max.100W
(not included)
Threaded Pipe
WS55508
WS55708
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
200427