Installation Instructions

Turn on the power at fuse or circuit box.
Turn off the power at fuse or circuit box.
Turn off the power at fuse or circuit box.
Installation Steps
190509
1. Remove the switch box cover from the switch box of the fan by loosing the three switch box screws.
2. Unscrew the center plug from the switch box cover and discard it.
3. Thread the fixture wire through the switch box cover.
4. Attach threaded pipe (-a) of the light kit to the switch box cover, then secure it with a washer (RR) and hex nut (QQ).
5. Cut the redundant wires if necessary. Pull out the wires from the switch box. Make wire connections using the
wire connectors (BB):
---The black wire from the fixture to the black (or blue) wire from the switch box.
---The white wire from the fixture to the white wire from the switch box.
Carefully put the wires back into the switch box.
6. Attach the switch box cover back to the switch box using the three switch box screws.
7. Install bulbs (included). See relamping label at socket area or packaging for maximum allowed wattage.
8. Thread the pull chain through the glass shade and the finial (OO). Carefully attach the glass shade to the pan by
inserting threaded pipe (-b), then secure it with the finial (OO).
9. Turn on the power at the main fuse or circuit breaker box. (You can control the light with the wood bead (SS).)
Mounting Parts for Ceiling Light
Outlet Box
House Ground Wire
Wire Connector (BB)
Fixture Mounting Screw (FF)
Mounting Strap (AA)
Lock Nut (GG)
Green Ground Screw (II)
Mounting Screw (EE)
Fixture Ground Wire (NN)
Hex Nut (CC)
Ground Pad (MM)
Washer (JJ)
Canopy (HH)
Ball Nut (LL)
Top Cap (DD)
Threaded Pipe (-c) (KK)
Hex Nut (CC)
Washer (JJ)
Coupling (PP)
Threaded Pipe (-d)
Fixture
For Ceiling Light:
For Light Kit:
1. Take out the coupling (PP), two hex nuts (CC), washer (JJ), threaded pipe (-c) (KK), top cap (DD), canopy (HH),
washer (JJ) and ground pad (MM) from the hardware package for ceiling light.
2. Secure the coupling (PP) to threaded pipe (-d), then threaded pipe (-c) (KK) into the coupling (PP) and secure it
with a washer (JJ) and hex nut (CC).
3. Attach the top cap (DD) with the open side facing downward and the canopy (HH) with the open side facing upward to
the fixure by inserting threaded pipe (-c) (KK), then secure them with a washer (JJ), ground pad (MM) and hex nut (CC).
4. Attach two fixture mounting screws (FF) to the mounting strap (AA), then secure them with two lock nuts (GG). Adjust
the length of the fixture mounting screws (FF) if necessary.
5. Attach the mounting strap (AA) to the outlet box by using two mounting screws (EE).
6. Pull out the outlet wires and the house ground wire from the outlet box. Make wire connections using the wire
connectors (BB):
---The black wire from fixture to the black wire from the outlet box.
---The white wire from fixture to the white wire from the outlet box.
---Attach the fixture ground wire (NN) to the mounting strap (AA) with
the green ground screw (II) . Then connect it to the house ground
wire with a wire connectors (BB).
Carefully put the wires back into the outlet box.
7. Attach the canopy (HH) to the mounting strap (AA) by inserting two
fixture mounting screws (FF), then secure them with the ball nuts (LL).
8. Follow steps 7~9 as for Light Kit.