Installation Instructions

190218

A: 4-1/4"

B: 4"

C: 13-1/2"

3. Attach the back plate to the mounting plate, secure the headless screws from the bottom hole of the back plate onto

the the bottom side of the mounting plate.

4. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.

5. Press the socket spring, place the interior glass shade into the glass bracket, adjust the slot of the interior glass

shade to locate into the arm of the fixture, then place the exterior glass shade into the glass bracket, adjust the

exterior glass shade to locate into the slot of the fixture. (See Fig. 1)

Page 2

Assembly Kit

(4596MM For W0049)

(5099MM For W0125)

(5962MM For W0309)

(1 SET)

The following parts are available for re-order if damaged or missing.

Turn on the power at the main fuse or circuit breaker box.

Exterior

Glass Shade (E)

(9382CW)

(1 PC)

Interior Glass Shade (F)

(9383FO)

(1 PC)

Mounting Screw (A) Green Grounding Screw (B)

“ L ” Screwdriver (D)

Wire Connector (C)