Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

C0150 / C0151 / C0152 / C0153

C0152 C0153 C0150 C0151

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Ceiling Pan

LED Module

Threaded Stud

Protective Cover

Plastic Shade

Metal Ring

Cap Nut

Outlet Box

House Ground Wire

Wire Connector (B)

Mounting Screw (A)

Ceiling Pan

LED Module

Threaded Stud

Protective Cover

Plastic Shade

Metal Ring

Cap Nut

Outlet Box

House Ground Wire

Wire Connector (B)

Mounting Screw (A)

Mounting Screw (A) Wire Connector (B)

210113

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0150 / C0151 / C0152 / C0153 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Remove the metal ring and plastic shade from ceiling pan by unscrewing the cap nuts. 2. Attach the two mounting screws to the outlet box, and screw them in 2 to 3 turns. 3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (B) as follows: ---Connect the hot wire (black insulation) from the fixture to the black wire from the power source.