Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0312

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Wire Connector (F)

Ball Nut (G)

Mounting Plate (A)

Green Grounding

Screw (C)

Headless

Screw (D)

Hardware Package (included):

Lock Nut (E)

181109

Outlet Box

Mounting Screw (B)

Mounting Plate (A)

Green Grounding Screw (

House Grounding Wire

Fixture Grounding Wire

Wire Connector (F)

Fixture Wire

Headless Screw (D)

Lock Nut (E)

Metal Shade

Bulb

Type

A Max.100W

(Not included)

Ball Nut (G)

Back Plate

PAGE 1
W0312 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Thread two headless screws through the mounting plate, then secure them with four lock nuts (two on each side of the mounting plate). Adjust the length of the headless screws if necessary. Note: Make sure that headless screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the mounting plate to the outlet box by using two mounting screws. 3. Pull out the source wires from the outlet box.