Installation Instructions

191211
4. Attach the backplate to the mounting plate unit (A) by aligning holes, secure the two set screws from the side hole
of the backplate into the side hole of the mounting plate unit (A).
5. Attach the tube to the fixture by threaded pipe.
6. Attach the glass shade onto the socket, then secure it with the socket ring using supplide socket fixer.
7. Install a bulb (not included). Check relamping label at socket area or packaging for maximum allowed wattage.
A: 19”
B: 5-1/4”
C: 7”
B
C
A
Turn on the power at fuse or circuit box.
Mounting Screw (B) Wire Connector (C) Set Screw (D)
Mounting Plate Unit (A)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
6172MM (1 SET)