Installation Instructions

Turn on the power at fuse or circuit box
Green Grounding
Screw (E)
Fixture Mounting
Screw(D)
Mounting Screw (B)
Wire Nut (C)
Lock Nut (F)
Ball Nut (G)
151113
8. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green
grounding screw, and then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting plate by inserting the fixture mounting screws, and then secure it with two ball nuts.
Mounting Plate (A)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
5454MM (1 SET)
A: 20-1/2"
B: 10-3/4"
Assembly Kit
5455AA(1 SET)
Hex Nut (I)
Metal Pad (J)
Long Threaded Pipe (H)
Decorative Cup (K)
Finial (L)