Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

W0378

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Bolt Nut (D)

Metal Shade

Socket Ring

Fixture

Bulb Type A Max.100W

(Not included)

Hardware Package (included):

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Cross Bar Unit (A)

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Headless Screw

Cross Bar Unit (A)

Fixture Wire

Fixture Ground Wire

Wire Connector (C)

Backplate

200907

PAGE 1
W0378 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THIS INSTRUCTION.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Attach the cross bar unit (A) to the outlet box by using two mounting screws (B). 2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: • Connect the hot wire (black insulation) from the fixture to the black wire from the power source. • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.