Installation Instructions

4
5
7
ASSEMBLY INSTRUCTIONS
6
5.)
Fasten fixture body (A) to the ceiling using four screws (CC).
6.) Where there is a wood joist, use a wood screw to mount the
fixture body (A). Where there is no joist, wall anchors must be
used to mount the fixture body (A) securely to the ceiling board.
NOTE: When mounted, the mounting hardware must secure the
fixture solidly to the ceiling. Wood screws must penetrate joists or
wall anchors must be placed through the ceiling board.
7.) To install diffuser (B). Starting at one end of fixture body (A),
insert diffuser slot onto edge of fixture body (A). Continue this
action down length of diffuser (B). Pull back spring loaded end cap
(C) to fully seat diffuser in chanel and release back to closed
position until fully installed onto fixture body (A).
Restore power at fuse or circuit breaker.
A
Joist
No-Joist
A
B
CC