Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsCirillo Black Integrated LED Flush Mount Ceiling Light

SKU Number: 351-8720

Cirillo LED Ceiling Light

Model Number: CIRF16L30D1BK

HARDWARE CONTENTS Note: Hardware shown not actual size.

Gem Bar

Junction Box

Screws

Wire Nuts

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-873-2326

Monday - Friday, 8:00 am-4:30 pm Central Standard Time

Flathead Screws

Summary of content (4 pages)

PAGE 1
SKU Number: 351-8720 Cirillo LED Ceiling Light Model Number: CIRF16L30D1BK Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-873-2326 Monday - Friday, 8:00 am-4:30 pm Central Standard Time PACKAGE CONTENTS A HARDWARE CONTENTS AA Gem Bar x1 Note: Hardware shown not actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • It is recommended that a qualified electrician perform all wiring. This fixture must be wired in accordance with all national and local electrical codes. • For installation in dry or damp residential applications. • Read all safety precautions and installation instructions carefully before installing or servicing this fixture.
PAGE 3
ASSEMBLY INSTRUCTIONS 1. Separate the gem bar (AA) from the fixture canopy (A) by removing two flathead screws (DD). 2. Mount gem bar (AA) to the junction box (not included) using two junction box screws (BB) (included). 1 AA A DD 2 Wiring – All wiring must take place inside junction box (not included). Caution: Make sure power is off at fuse or circuit breaker box. Check power wires for damage or scrapes.
PAGE 4
CARE AND MAINTENANCE Use a dry or slightly damp clean cloth to wipe the surface of the fixture. Do not use any cleaner with chemical solutions and abrasive pad. If necessary, use a mild soap with water to clean off any dirt or stains. TROUBLESHOOTING 1. The light does not come on at all: a) Make sure the wall switch and circuit breaker are turned on b) Make sure all wiring connections are connected and secured. 2.