Installation Instructions

ManualsBrandsPatriot Lighting ManualsChandeliersGage Black with Wood Accents 4-Light Chandelier

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS (continued)

7. Once connections of wires are completed,

carefully tuck wires and wire nuts (AA) into the

electrical box making sure no bare wire

(on the black and white) is visible at the

wire nuts (AA).

TROUBLESHOOTING

1) The light does not come on at all:

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

2) Fuse blows or circuit trips when light is turned on.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service

at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST

5-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING

light fixture fails due to a defect in material and workmanship within five (5) years

from the date of purchase, simply bring this light fixture with your original sales

receipt back to your nearest MENARDS

retail store. At its discretion, PATRIOT

LIGHTING

agrees to have the lighting fixture replaced with the same or similar

PATRIOT LIGHTING

product free of charge, within the stated warranty period,

when returned by the original purchaser with original sales receipt. This warranty:

(1) excludes expendable parts including but not limited to light bulbs; (2) does not

cover damage that has resulted from abuse or misuse; and (3) does not cover any

losses, labor, injuries to persons/property or costs. This warranty does give you

specific legal rights and you may have other rights, which vary from state to state.

CARE AND MAINTENANCE

• To clean, turn off and wipe with a damp, non-abrasive cloth.

• When cleaning, use only a solf brush or lint free cloth to avoid scratching the finish.

• Abrasive cleaning agents are not required and should be avoided to prevent damage

to finish.

6. Connect the ground wires (bare copper or

green) from your fixture to the ground wire

(bare copper or green) or ground screw in the

electrical box. Connect the black wire (or wire

marked “SPT-1”) from the fixture to the black

wire in the electrical box and connect the

white wire (or the wire with ribbed side) from

the fixture to the white wire in the electrical

box.

Black

House supply

Ground wire

Fixture

Ground

wire

White

8. Slide the canopy (DD) up the chain (EE)

and over the upper connector. Slide the nut

up the chain (EE) and thread onto the upper

connector.

Nut

9. Install the specified bulb (FF) type and

wattage.