Installation Instructions

ManualsBrandsPatriot Lighting ManualsChandeliersGage Black with Wood Accents 4-Light Chandelier

Sku Number: 351-9197

4LT Chandelier

Model Number: ICH690A04-M

Questions, problems, missing parts?

Before returning to your retailer, call our customer service

at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

07-17

Wire Nut

x 3

Electrical Box Screw

x 2

Canopy

x 1

Chain

x 1

Mounting Bracket

x 1

Bulb

x 4

Summary of content (4 pages)

PAGE 1
Sku Number: 351-9197 4LT Chandelier Model Number: ICH690A04-M Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST PACKAGE CONTENTS B C A HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. Please save this instruction manual. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
4 5 ASSEMBLY INSTRUCTIONS (continued) 6. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire marked “SPT-1”) from the fixture to the black wire in the electrical box and connect the white wire (or the wire with ribbed side) from the fixture to the white wire in the electrical box.
PAGE 4
3 ASSEMBLY INSTRUCTIONS 1. Tighten the loop (B) to the stem on the fixture (A). Install the decorative frames (C) with the star washers and nuts. Electrical Box BB Nipple Nut B Star Washer Hex nut CC 4. To attach chain loop to light fixture, use a screwdriver and wrench to open and close chain loop. Ensure to close the opening. Weave the power cord and ground wire through the links in the chain (EE). C Power Cord EE A 2. Determine the height that you would like to hang your fixture.