Installation Instructions
5. Secure the canopy (DD) to the
mounting strap unit (AA), then
secure it by tightening the
collar (EE).
AA
EE
5
Page 3 of 3
190614
● To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not work:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
CARE AND MAINTENANCE
TROUBLESHOOTING
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
DD
Spare Parts List:
The following parts are available for re-order if damaged or missing. Call our toll-free at 1-800-887-6326.
Assembly Kit
6115MM (1 SET)
Loop Lock
X2
Chain
X1
Mounting strap Unit
X1
Mounting Screw
X2
Wire Connector
X3
Canopy
X1
Collar
X1
AA
BB
CC
EE
DD
FF
GG
ASSEMBLY INSTRUCTIONS (continued)
6. Secure the glass shade (B) onto the
glass holder and tighten the glass
shade with the socket ring.
Install 5 X 60W medium base
vintage bulbs (HH) (included).
See relamping label at socket
area or packaging for maximum
allowed wattage.
Turn on the power at fuse or circuit box.
Vintage Bulb 60W
8080CEB
HH
B
Glass Shade
10100CE
6
Socket
Ring
Glass
Holder
HH
B