Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting1050 Lumens 7 x 7 Round Integrated LED Flat Panel Light

Question/Comment/Missing Part?

Customer Service 1-800-205-6201

WARNI NG:

TO AVOID RISK OF ELECTRICAL SHOCK

TURN OFF OR DISCONNECT FROM POWER

WHILE INSTALLING OR SERVICING UNIT

Installation Instructions: 351-0013 (M-FP-7R-W) | 7.5" 1000 Lumen LED Round Flat Panel Light

- When using product, basic precautions should always be followed.

- Read and follow these instructions and heed all warnings.

- Carefully read and understand the information given in this manual

before beginning installation. Failure to do so could lead to electric

shock, ﬁre, or other injuries which could be hazardous or even fatal.

- Save these instructions and warnings.

- Use carabiner hook to hang product, do not use the electrical cord.

- Do not install on radiant heated ceiling.

- This item is designed for dry use and is not water proof.

- Do not place this item in a humid or dusty environment.

- Do not use in areas with temperature higher than 104° Fahrenheit.

- Do not use in areas near a gas source.

WARNING

CAUTION

PRE-INSTALLATION:

1. Before assembly, compare package contents

with parts list to make sure all parts are present.

2. Shut off power at circuit breaker before removing existing ﬁxture. If you are unfamiliar with electrical

installations, we recommend you have a qualiﬁed electrition complete your intallation.

3. Select suitable location that can support the weight of the ﬁxture. Determine mounting method (Page 2).

4. Mark two spots on the ceiling 42” apart for the mounting hardware (not included).

Measuring Tape

TOOLS REQUIRED:

Power Drill

HARDWARE:

Part Description Quantity

AA Chain 2

BB “S” Hook 2

Question/Comment/Missing Part?

Customer Service 1-800-205-6201

WARNI NG:

TO AVOID RISK OF ELECTRICAL SHOCK

TURN OFF OR DISCONNECT FROM POWER

WHILE INSTALLING OR SERVICING UNIT

Assembly & Installation Instructions: 370-5439 | 10ft LED String Light

PRE-INSTALL

HARDWARE

Tools required

1. Before assembly compare package contents with list to make sure

all parts are present.

2. Shut off power at circuit breaker before removing existing xture. If

you are unfamiliar with electrical installations, we recommend you

have a qualied electrician complete your installation.

3. Select suitable location that can support the weight of the xture.

Determine mounting method (Page 2.).

4. Using the Color Temperature Guide Card select whichever color

temperature best ts your environment

Part Description Qty

AA 7 Inch Light 1

BB Mounting Bracket 1

CC Torsion Springs 2

DD E26 Adapter 1

EE Wires with Connector 1

Part Description Qty

FF Ground Wire 1

GG Mounting Screws 2

HH Wire Nuts 3

II Grounding Screw 1

JJ Torsion Bracket Screws 4

Part Description Qty

KK Black Trim 1

LL Brushed Nickel Trim 1

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Phillips Screw Driver

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you have any non-electrical

questions about this fixture, please call our Customer Service Team at

1-877-527-0313 or visit www.homedepot.com. Please reference your

SKU (204-960) or UPC (046335960640).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not

included):

ELECTRICAL TAPE

SAFETY

GOOGLES

WIRE STRIPPERSWIRE CUTTERS

#2 PHILIPS

SCREWDRIVER

FLATHEAD

SCREWDRIVER

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

screwdriver

AA BB CC DD EE

FF GG

HH II JJ KK LL

Part Description Quantity

AA 7.5 in. ﬁxture 1

BB Mounting bracket 1

CC 5 & 6 in. Torsion spring brackets 2

DD E26 adapter with male connector 1

EE Stripped wires with male connector 1

FF 5 & 6 in. Torsion springs 2

GG Ground wire 1

HH Ground wire screw 1

II J-Box mounting screws 2

JJ Wire nuts 3

KK 5 & 6 in. Torsion spring screws 2

LL 5 & 6 in. Torsion bracket mounting screws 4

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

KK LLII

Summary of content (4 pages)

PAGE 1
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT CAUTION WARNING Installation Instructions: 351-0013 (M-FP-7R-W) | 7.5" 1000 Lumen Round Panel Light Assembly & Installation Instructions: 370-5439 | LED 10ft LEDFlatString Light Pre-Installation - When using product, basic precautions should always be followed. - Read and follow these instructions and heed all warnings.
PAGE 2
recessed housing. Connect the orange connectors WARNING: Choosing5-6 a color temperature In. Recessed Can Installation TO AVOID RISK OF ELECTRICAL SHOCK before installing TURN OFFAdjusting OR DISCONNECT POWER the FROM torsion springs 1 Turning Offa the □ Use the slide switch to choose colorPower 54 WHILE INSTALLING OR SERVICING UNIT Connecting the terminals □ Insert the torsion springs into the fixture hous temperature before installing.
PAGE 3
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT Installation Instructions: 351-0013 (M-FP-7R-W) | 7.5" 1000 Lumen LED Round Flat Panel Light INSTALLATION INSTRUCTIONS (For Junction Box) 1. If you want to install one of the provided trims; provided wire nuts (HH). Refer to Fig 1. Be sure to attach the grounding wire (FF) to the mounting plate (BB) with the grounding screw (II).
PAGE 4
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT Installation & Instructions: 351-0013 (M-FP-7R-W) | 370-5439 7.5" 1000 Lumen Round Panel Light Assembly Installation Instructions: | LED 10ft LEDFlatString Light CARE AND CLEANING Your fixture is made from quality materials that will last many years with minimum care. You may want to periodically clean the diffuser or interior of the fixture. - Use a mild, non-abrasive glass cleaner.