Installation Instructions

PREPARATION
Before beginning assembly, installation or operation of product, make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters,
Safety Glasses, Ladder, Wire Stripper.
ASSEMBLY INSTRUCTIONS
To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
CARE AND MAINTENANCE
TROUBLESHOOTING
AA
BB
A
Turn off the power at fuse or circuit box.
1. Attach the two mounting screws
(AA) to the holes on outlet box,
thread them in part way: 2 to 3
turns only.
1
1
1
2
3
2. Connect the black wire from the
fixture to the black wire (live wire),
white wire from the fixture to the
white wire (neutral wire), the copper
wire from the fixture to the ground
wire with supplied wire connectors
(BB). Tuck all wires into outlet box.
3. Attach the ceiling pan(A) to the
outlet box by inserting two
mounting screws(AA) head into
the key holes, and then rotate
the ceiling pan(A) until it is
locked in place, finally secure
the mounting screws (AA) tightly
with screwdriver (not included).
AA
Turn on the power at fuse
or circuit box.
4. Attach the fixture ring(B) to
the ceiling pan(A), align the
round-mark on fixture ring(B)
with the round-mark on ceiling
pan(A), so the round-marks
point to each other. Turn the
fixture ring(B) anti-clockwise
until it is locked into place.
4
A
B
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PARTIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
5
5. Thread the Phillips head screw
(CC) from fixture ring(B) to
the ceiling pan(A), then twist
tightly.
Once the fixture ring(B) is
installed, remove round-mark
label on the fixture ring (B)
CC