Installation Instructions

Sku Number: 3514727 3514728

2PK KAI LED CEILING LIGHTS

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Screw

Wire Connector

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or

switching off circuit breaker).

Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact

any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury

or death from electric shock.

CAUTION

All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).

Contact your municipal building department to learn about your local codes, permits and/or inspections.

Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use

a fixture in a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means,

do not attempt to install this fixture. Contact a qualified, licensed electrician for information with regards to proper

grounding methods as required by the local electrical code in your area.

SAFETY INFORMATION

This product must be installed in accordance with the applicable installation code by a person familier with the

construction and operation of the product and hazards involved.

For assistance or missing parts, please call toll free 1-888-722-5089

Or mail: 507 Lindgren Ln, Belvidere, IL 61008, USA

This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this fixture

are the Lutron: DVWCL-153PH, MACL-153MH, SCL-153P, TGCL-153PH. If you are unfamiliar with electrical

installation, it is recommended to use a qualified electrician for your installation(s).

LED electronics can be damaged by electro static discharge (ESD)shock. Before installation, discharge yourself by

touching a grounded bare metal surface to remove this hazard. To avoid damage, do not touch the LED module.

Phillips Head Screw

X3 (1pc for spare part)

Ceiling pan

Fixture ring

PAGE 1
Sku Number: 3514727 3514728 2PK KAI LED CEILING LIGHTS For assistance or missing parts, please call toll free 1-888-722-5089 Or mail: 507 Lindgren Ln, Belvidere, IL 61008, USA PACKAGE CONTENTS A Ceiling pan B Fixture ring HARDWARE CONTENTS Note: Hardware not shown actual size. AA Mounting Screw X4 CC Phillips Head Screw X3 (1pc for spare part) BB Wire Connector X6 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
PAGE 2
PREPARATION Before beginning assembly, installation or operation of product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses, Ladder, Wire Stripper. ASSEMBLY INSTRUCTIONS Turn off the power at fuse or circuit box. 1.