Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsMelon Satin Nickel 13" LED Flush Mount Ceiling Light 2PK

PREPARATION

Before beginning assembly, installation or operation of product, make sure all parts are present. If any part is missing or

damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.

Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters,

Safety Glasses, Ladder, Wire Stripper.

ASSEMBLY INSTRUCTIONS

Attach the threaded pipe(EE) into

the coupling of the ceiling pan (A)

and secure the preinstalled washer

and hex nut.

NOTE: Depth of threaded pipe

may need to be adjusted to

properly fit glass shade,

decorative cap and finial.

Turn off the power at fuse or circuit box.

1. Attach two long screws(CC) to the

holes on the mounting strap(AA).

Thread them in part way: 2 to 3

turns only.

2. Attach the mounting strap(AA) to

the outlet box using two mounting

screws(BB).

3. Connect the fixture black wire to house

black wire, and fixture white wire to

house white wire using wire connectors

(DD) provided. Connect the copper wire

on the light fixture to the mounting strap

(AA) by securing it with the preinstalled

green grounding screw, then connect it

to the house grounding wire with wire

connector(DD). Tuck all the wires into

outlet box.

4. Attach the ceiling pan (A) to the

mounting strap (AA) by inserting two

long screw (CC) heads into the key

holes, and rotate the ceiling pan (A)

until it is locked in place. Then secure

the screws tightly.

Keyhole Slot

CC A

To clean, turn off and wipe with a damp, non-abrasive cloth.

1) The light does not come on at all:

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

2) Fuse blows or circuit trips when light is turned on.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

CARE AND MAINTENANCE

TROUBLESHOOTING

6.Install two Bulbs A19 (C)

Attach the glass shade(B) to the

ceiling pan(A) by inserting the

threaded pipe(EE) through the

hole in the glass shade, and then

secure it with a Silicone pad(GG),

Metal pad (HH) and a hex nut(FF).

7. Attach the decorative cap(II) to the

end of threaded pipe(EE), and then

secure it with the finial(JJ).

Turn on the power at fuse or circuit

box.