Manualshelf

Installation Instructions

ManualsBrandsPatriot Lighting ManualsLighting & Ceiling Fans32' 150-Light Multi-Color String Light
12
User Servicing Instructions
Replace the fuse.
a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
c) Remove fuse carefully.
d) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f )
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Replace the lamp.
1, Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2, Pull lamp and plastic base straight out of lampholder.
3 .Replace lamp with only 2.5 Volt , 0.425 Watt super bright type lamp (provided with product).
If the new lamp base does not fit in lampholder, follow the steps below before step 3.
a) Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c) After lamp is fully inserted into base, bend each lead up, like other lamps in the light
set so that the leads will touch the contacts inside the lampholder
If connecting to a lighting string that does not have a Wattage (W) rating (found on the tag within 6 inches of the plug)
calculate the wattage as follows: Multiply the current ( A), which is on the flag-type tag by120.
For Example: Lighting String is rated 120V, 60Hz, 0.2 Amps .0.2 x 120 = 24 Watts.
Add the wattage of each light string together for a total of 216 watts or less.(Do not exceed 216 watts)
CAUTION
1.
To r e d u c e t h e r i s k o f o v e r h e a t i n g ,replace burned-out lamps promptly. Use 2.5 volt, 0.425 watt lamps only.
2. To r ed uc e t he r is k o
f fire and electric shock: a)Do not install on trees having needles, leaves or branch coverings of metal
or materials which look like metal, and b) Do not mount or support strings in a manner that can cut or damage wire
insulation.
MODEL NO.DGA-150/3F(0.51)