Installation Instructions

1. Attach the threaded pipe to the mounting strap, then
secure it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to the threaded pipe.
4. Adjust the arms of the fixture according to the drawing
of the package.
Important:
a. The arms should be positioned with equal distances
between them.
b. The arms should be fixed securely.
5. Attach the metal ring up to the arms, adjust the arms accordingly
to align the holes in the arms and the holes in the metal ring, then
secure the metal ring to the arms with bolt nut screws.
6. Choose the length of the chain you need, then weave the fixture
wire and the fixture grounding wire through the chain, collar and
canopy.
7. Connect one end of the chain with the loop by using a loop lock.
8. Connect the other end of the chain with the top loop by using
another loop lock.
9. Thread the fixture wire and fixture grounding wire through the top
loop, threaded pipe and mounting strap.
10. Pull out the outlet wires and house grounding wire from the outlet
box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black wire
from the power source.
---The ridged wire (unmarked) from the fixture to the white wire
from the power source.
---Attach the fixture grounding wire to the
mounting strap with the green grounding
screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet
box.
11. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
12. Attach the glass shades to the glass holders, then secure them with socket rings.
13. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
14. Turn on the power at the main fuse or circuit breaker box.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 8 a.m. – 5 p.m. CST)
3. READ AND SAVE THIS INSTRUCTION.
352-7571
090529
Loop Lock
Loop Lock
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding Wire
Mounting Strap
Green Grounding Screw
Mounting Screw
Threaded Pipe
Canopy
Top Loop
Hex Nut
Washer
Collar
Chain
Loop
Stem
Fixture
Arm
Glass Shade
Metal Ring
Bolt Nut Screw
Glass Holder
Socket Ring
Bulb Type A Max.60W
(not included)