Manualshelf

Installation Instructions

ManualsBrandsPatriot Lighting ManualsChandeliersNewberry 3-Light Matte Black Chandelier
12
Nipple(-b)
1. Attach nipple(-a) to the mounting strap, then secure it with
a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the loop to nipple(-b).
4. Adjust the iron rings of the fixture according to the drawing of
the package.
Important:
a. The iron rings should be positioned with equal
distances between them.
b. The iron rings should be fixed securely.
5. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain.
Then connect one end of the chain with the loop by using
the loop lock.
6. Secure the top loop to nipple(-a).
7. Thread the fixture wire and fixture grounding wire
through the collar, canopy, top loop, nipple(-a) and
mounting strap.
8. Connect the other end of the chain with the top loop
by using the loop lock.
9. Pull out the outlet wires and the house grounding
wire from the outlet box. Make wire connections
using the wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
11. Install bulbs(not included). See relamping label at socket area or packaging for maximum allowed
wattage.
12. Attach the glass shades onto the glass holders.
13. Turn on the power at the main fuse or circuit breaker box.
Glass Shade
Glass Holder
Fixture
Bulb Type B Max.60W
(not included)
Loop
Contents of Spare Parts:
Assembly Kit
(1 SET)
(4512MM)
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding Wire
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple(-a)
Canopy
Top Loop
Hex Nut
Washer
Collar
Loop Lock
Loop Lock
Chain
Glass Shade
(3 PCS)
(9338CE)
Iron Ring
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2.
Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
120411
352-5954

Summary of content (2 pages)