Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsGable Noble Bronze 2-Light Flush Mount Ceiling Light

Fig.1

Screw

Key Hole Slot

Patriot Lighting

130422

1. Attach the two long screws to the mounting strap, and

screw in 2 to 3 turns.

2. Attach the mounting strap to the outlet box by using two short mounting screws.

3. Pull out the outlet wires and the house grounding wire from the outlet box.Connect wires:

---The black (hot) wires from the fixture to the black (hot) wire from the power source.

---The white (neutral) wires from the fixture to the white (neutral) wire from the power source.

---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then

connect it to the house grounding wire with the wire nut.

Carefully put the wires back into the outlet box.

4. Attach the ceiling pan to the mounting strap by inserting two long screws heads into the key holes,

and rotate the ceiling pan until it locks in place. Then secure the screws tightly. (See Fig.1)

5. Screw the threaded pipe into the coupling, then secure it with a washer and hex nut.

6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

7. Attach the glass shade to the ceiling pan by inserting the threaded pipe, then secure it with a metal

pad and hex nut.

8. Slip the cover up through the nipple, secure it with a finial.

9. Turn on the power at the main fuse or circuit breaker box.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)

3. READ AND SAVE THESE INSTRUCTIONS.

352-5976

Bulb Type A Max.60W

(not included)

Socket

Coupling

Hex Nut

Threaded Pipe

Hex Nut

Finial

Glass Shade

Washer

Outlet Box

House Grounding Wire

Wire Nut

Long Screw

Ceiling Pan

Mounting Strap

Green Grounding Screw

Short Mounting Screw

Metal Pad

Cover

Hardware Package:

(1 SET)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS 352-5976 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST) 3. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
In case of damaged or missing parts, please call toll-free at 1-800-887-6326 Contents of Spare Parts: Assembly Kit (1 SET) (4704MM) Glass shade (1 PC) (9424FC) 5-YEAR LIMITED WARRANTY: This Patriot Lighting fixture carries a limited warranty against defects in material or workmanship. If the Patriot Lighting product fails at any time within five (5) years after the original date of sale due to defects in material or workmanship, return the product to Menards with the original sales receipt.