Installation Instructions

5-YEAR LIMITED WARRANTY:
This Patriot Lighting fixture carries a limited warranty against defects in material or workmanship. If the Patriot Lighting
product fails at any time within five (5) years after the original date of sale due to defects in material or workmanship,
return the product to Menards with the original sales receipt. At its discretion, Patriot Lighting will replace the defective
fixture with the same or similar fixture or issue a refund. This warranty and any implied warranty (including but not limited
to any implied warranty of merchantability or fitness for a particular purpose) does not cover glass globes, light bulbs and
other expendable items. This warranty excludes coverage of finish or color against tarnishing, flaking, and discoloration.
If the original purchaser ceases to own the Patriot Lighting product this warranty and any implied warranty will be void.
This warranty does not cover damage caused by misuse or abuse, including but not limited to improper installation,
improper usage, accident, negligence, unauthorized repair, unauthorized modifications, or unauthorized maintenance of
the fixture. This warranty does not include reimbursement for inconvenience, installation, setup time, returned shipping
charges or defects, losses, labor, injuries to personal property.
This warranty gives the consumer specific legal rights, and the consumer may have other rights which vary from state to
state. The seller’s employees are not qualified to advise on the use of the the fixture. Any oral representations made will
not be binding on seller or its employees.
For questions regarding this product, call us toll-free at 1-800-887-6326.
140331
Spare Parts List:
Assembly Kit
5056MM For 352-5810
5057MM For 352-5811
(1 SET)
Glass Shade
9598AL
(1 PC)
This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this
fixture are the Lutron: S-603PG, DVCL-153P, TGCL-153P.
If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician for your
installations.
In case of damaged or missing parts, please call us toll-free at 1-800-887-6326
4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes. Rotate the ceiling
pan until it is locked into place. Then tighten the long screws to secure it. (See Fig.1)
Caution: To prevent electrostatic discharge (ESD) damage to the module electronics, do not touch the LED
module on the ceiling pan.
5. Screw the threaded pipe into the coupling, then secure it with a washer and hex nut.
NOTE: Depth of threaded pipe may need to be adjusted to properly fit shade, decorative cup, and finial.
6. Attach the glass shade to the ceiling pan: Inserting the threaded pipe through the hole in the glass shade, then secure
using rubber pad, metal pad and hex nut. Finally, attach the decorative cup to end of threaded pipe using finial to secure.
Turn on the power at the main fuse or circuit breaker box.