Installation Instructions

Bluetooth Connection Steps:

1. Once turn on the power, the Bluetooth Speakers are enabled and ready to connect.

2. Enable Bluetooth on your smart device.

3. Wait for the smart device to detect the “ceiling light” and then select it to pair the device to the speakers. When

successfully paired, the speaker will respond "Connected".

4. Play music from your device while connected to the ceiling light to enjoy sound from the Bluetooth speakers.

5. Disconnect the ceiling light from Bluetooth on your smart device or disable Bluetooth functionality on your smart

device when sound is not wanted from the ceiling light speakers.

NOTICE:

1. Bluetooth enabled smart devices typically have a range of approximately 33 ft. (10 m). Attempting to pair your smart

device to the Bluetooth speakers beyond the intended range can result in poor audio quality, drop-outs, or failure to

connect.

2. Only one device can be connected to the Bluetooth speakers at a time.

3. The speaker includes a battery (18650 type 2000mAh). The speakers can continue working even turn off the light by

dimmer or switch. If the speaker battery run out of power, it will blue indicator flashes quickly, please turn on the light

right away and the battery will start charging automatically.

Page 4 of 6

201225

The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.

Spare Parts Lis

Assembly Kit

6271MM (1 SET)

Plastic Shade

10192AC

Mounting Strap

Short Screw

Mounting Screw

Wire Connector

Battery

7188BB

CHANGING BATTERIES

Replacing Battery Steps：

1. Turn off the power at fuse or circuit box.

2. Remove the battery cover from the fixture with a screwdriver.

3. Replace the old battery with a new battery 7188BB (Model 18650 2000mAh).

4. Re-attach the battery cover to the fixture with a screwdriver.

Battery

Cover

Battery

Fixture

OPERATING THE CEILING LIGHT AND BLUETOOTH SPEAKERS (continued)