Installation Instructions

Page 3 of 6
201225
Turn on the power at fuse or circuit
box.
6. Attach the plastic shade (B) to
the ceiling pan (A) by aligning
studs and slots, then turn it
clockwise until it is locked in place.
Stud
A
6
Slot
B
ASSEMBLY INSTRUCTIONS (continued)
5. Attach the ceiling pan (A) to the
mounting strap (AA) by inserting
two screw (CC) heads into the
key holes and rotate the ceiling
pan (A) until it is locked in place.
Then secure the screws tightly.
A
5
CC
Adjus�ng the color Temperature of the Light
Customizing the color temperature of LED light by moving toggle switch (For Reference).
7-a 7-b
View Fig.1-b
a. Move the toggle switch to 3000K, the color temperature is set at 3000K.
b. Move the toggle switch to 4000K, the color temperature is set at 4000K.
c. Move the toggle switch to 5000K, the color temperature is set at 5000K.
Notice: Please move the toggle switch to make your selection before attaching plastic
shade (B) to the ceiling pan (A).
A
B
Color Temperature
Toggle Switch
OPERATING THE CEILING LIGHT AND BLUETOOTH SPEAKERS
INSTRUCTIONS:
1. Recharged for battery. Turning the fixture light on,
when the indicator light in the speaker grid is lighten
(red), that shows that the speaker is being connected
and the power is being recharged.
2. The "Blue" indicator light shows the following status:
"Slow Flashing" - Awaiting to connect to the device.
"Stays On" - Device connected.
"Quick Flashing" - Battery Power is Low.
"Blue Light Off" - Battery is dead.
There is a "Reset" button on light. Please use a slim and long thing like unfold clip to press the button, when the button
is pressed down, the connected Bluetooth will be disconnected, and then waited for another device to connect.
8
Charging Indicator Light (Red)
Bluetooth Indicator Light (Blue)
9
Reset Button