Installation Instructions

USER GUIDE (continued)
6. Click "..." at the top right
corner to configure or
dismiss groups, as shown
in Fig.6.
5. Open the group control
panel as shown in Fig. 2.
5
6
Smart Features - Automation
2. Select "Automation" to go
to the smart configuration
page as shown in Fig. 3.
1. Click “Add Smart“ on the
"Smart" page or "+" at the
top right corner.
1
2
Add condition:
4. For example, to add
temperature as a condition,
select temperature as
shown in Fig. 4.
3. Click "+" as shown in Fig. 3
to add multiple conditions
or multiple actions.
3
4
Page 19 of 34
210623