Installation Instructions

Spare Parts List:
Mounting Screw
X2
Assembly Kit
6134MM (1 SET)
Frosted White Acrylic Shade
10107AC
Wire Connector
X3
AA
BB
B
Page 3 of 4
190829
This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this
fixture are the Lutron: TGCL-153PH, MACL-153MH, SCL-153PH, DVWCL-153PH.
If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your
installation(s).
1. Using Toggle Switch
a. Move the toggle switch to 3000K, the color temperature is set at 3000K.
b. Move the toggle switch to 4000K, the color temperature is set at 4000K.
c. Move the toggle switch to 5000K, the color temperature is set at 5000K.
2. Using Wall Switch
a. While the light is on, turn off and on wall switch within 3 seconds to change color temperature.
b. If light turns off for more than 3 seconds, the color temperature will remain at the last color
temperature setting before switch off.
Adjus�ng the color Temperature of the Light
Customize the color temperature of this LED light by using two ways
1-a 1-b
Toggle
Switch
Color Temperature
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.
View Fig.1-b