Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsJulius Integrated LED Flush Mount Ceiling Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 351-0008

LED FLUSH MOUNT

Model Number: C7101

PACKAGE CONTENTS

Page 1 of 4

190829

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Screw

Wire Connector

Summary of content (4 pages)

PAGE 1
Sku Number: 351-0008 LED FLUSH MOUNT Model Number: C7101 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this fixture are the Lutron: TGCL-153PH, MACL-153MH, SCL-153PH, DVWCL-153PH. If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s). Adjus�ng the color Temperature of the Light Customize the color temperature of this LED light by using two ways 1-a 1-b View Fig.1-b Toggle Switch Color Temperature 1. Using Toggle Switch a.
PAGE 4
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not come on at all: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.