Installation Instructions

● To clean, turn off and wipe with a damp, non-abrasive cloth.

1) The light does not work:

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

2) Fuse blows or circuit trips when light is turned on.

Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

CARE AND MAINTENANCE

TROUBLESHOOTING

Page 3 of 3

200310

FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails

due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this

lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT

LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT

LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser

with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does

not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to

persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary

from state to state.

5. Attach the threaded pipe (EE) into

the coupling of the ceiling pan (A)

and secure the preinstalled washer

and hex nut.

NOTE: Depth of threaded pipe

may need to be adjusted to

properly fit glass shade,

decorative cap and finial.

ASSEMBLY INSTRUCTIONS (continued)

6. Install two Bulbs Type A

Max.60W ( not included).

Attach the glass shade (B) to the

ceiling pan (A) by inserting the

threaded pipe (EE) through the

hole in the glass shade, then

secure it with a metal pad (GG)

and a hex nut (FF).

7. Attach the decorative cap (HH) to the

end of threaded pipe (EE), then

secure it with the finial (II).

Medium Base Bulb

Max.60W

(not included)

Turn on the power at fuse or circuit box.