Installation Instructions

AA
3.
Important: It is important that the outlet box in
your home is properly grounded.
Connect the neutral(WHITE or RIBBED side) fixture wire to
the neutral (usually WHITE) wire from the outlet box.
Fasten wires together with a wire connector (AA) and tightly
wrap wire connector (AA) with electrical tape.
Connect the hot (BLACK or SMOOTH side) fixture wire to the hot
(usually BLACK) wire from the outlet box.
Fasten wires together with a wire connector (AA) and tightly
wrap wire connector (AA) with electrical tape.
Tuck wires into the outlet box.
4.
ASSEMBLY INSTRUCTIONS
EE
CC
FF
C
A
B
EE
DD
DD
JJ
KK
Attach the canopy (B) to the universal crossbar (EE),
then secure it with the crossbar nut (DD) and finial (KK).
Then install the ST64 60W bulbs (FF) to the fixture body (A).
3
4
If attaching to the ground wire in the outlet box, fasten
together with a wire nut (AA) and tightly wrap with electrical
tape (not included).
Attach the ground fixture wire to either green ground
screw (CC) on universal crossbar (EE) or to the ground
wire in the outlet box (usually GREEN or BARE).
GND
GND