Installation Instructions
Crossbar nut (preassembled)
3
Outlet box screw
Ground screw
2
Wire nut
1
Universal crossbar
3
1
3
AA
BB
CC
EE
ST64 bulb
4
FF
Fixture chain (60”)
2
GG
Fixture chain (14”)
2
HH
Chain link
8
II
Mounting nipple (preassembled)
1
JJ
Finial (preassembled)
1
KK
DD
EE FFAA BB CC
PREPARATION
TOOLS REQUIRED
To avoid damaging the product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Inspect each part for defects
such as the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the
wire, do not continue the assembly process.
PRE-INSTALLATION
Flathead
screwdriver
Phillips
screwdriver
Pliers Electrical tape Wire cutters Drill
HARDWRE INCLUDED
Hardware not shown to actual size.
Estimated Assembly Time: 45-60 minutes
IIGG HH
Ladder
GND
DD
KKJJ